How to order
How to Place an Order & What to Consider First
Sleeve Selector
This guide helps you find compatible sized penis sleeves, while also being provided a Recommended Internal Dimensions for ordering.
Girth Calculators
Below there are 2 Girth Calculators to choose from. You will need to enter all three data fields:
- Sleeve Diameter (or Circumference) You can get this from the listing of the sleeve you are looking at.
- Sleeve Interior Diameter (or Circumference)
- Penis Diameter (or Circumference)
Diameter Calculator
Circumference Calculator
Sizing Guide
Length
Measure your penis in an erect state, while standing. Measure the length from the top side, not the balls side. Do NOT push into pubic fat, skin or to the pubic bone. If you do, what you will end up with is a sleeve that is too long on the interior. When you roll it down it will pinch and grab at your pubic flesh or scrotum.
Measure the length of your penis that you want the sleeve to cover. Do not round down automatically by a ½”. Go with the measurement of where you want the sleeve to cover. If you are in between lengths, then you can round down.
- If you are 5″ you do not round down to 4.5″, Stay at 5″.
- If you are 5.25″ you can round down to 5″.
- If you are 5.4″ round up to 5.5″.
We are pretty accurate with the core but these are hand made and BC has around a +/- ⅛” wiggle room. The main thing you want to avoid is being too long on the interior.
Diameter
The interior of a sleeve is not intended to be the same diameter as your penis or larger. The interiors are intended to be smaller than the diameter of your penis. This creates an air tight fit that creates the suction/friction fit that will hold the sleeve in place. Follow the charts below or use the “contact us” option at the top of the page to figure out what diameter interior is right for you.
Measure your erection’s diameter in several spots and take the average. If there is a distinct difference in one area of your penis diameter, say the head is 2.25″ in diameter but the shaft is 1.5″ message us for fitting assistance. Otherwise, take your average diameter and use that number to determine the interior size needed for your sleeve.
If you are having a hard time measuring the diameter, you can use the string method. Wrap a string around your erection and mark the length. Measure the string and divide that number by 3.14. That will give you your diameter.
This chart will help you select the correct interior diameter you will need to select from the dropdown. If you need help finding the right diameter, reach out to us.
DO NOT ORDER A SLEEVE WITH AN EXTERIOR DIAMETER THAT IS LESS THAN YOUR PENIS – Ouch! Sleeves smaller in diameter than your penis can feel very tight.
Sleeve List by Length: Click here to view Blissfull Creations Models By Length
Sleeve List by Girth: Click here to view Blissfull Creations Models By Girth
Color
Blissfull Creations believes your sleeve should be an extension of your body AND your Style.
We offer a large variety of colors including 5 flesh tones and Translucent Clear. All colors are body safe.
Colors may differ based on your monitor’s color calibration.
If you are looking to ensure the accuracy of a flesh tone we highly recommend ordering a BC Shore Ring and specifying the color you are looking for in the customer notes at checkout.
To see all our colors Click Here:
Surface Finishes
Whisper Finish
Whisper Finish is our new surgical grade body safe finish. It is transparent/translucent in appearance. It is baked onto the surface of the silicone after it has been cast and is permanent. Whisper is the only finish that reduces the surface friction of silicone. Silicone has a surface friction 3 times higher than human skin. This is the reason silicone toys require so much lubrication.
Whisper greatly reduces the friction thus reducing the amount of lube that is needed. Where Durian may feel low friction when the silicone is dry it does not reduce the surface friction once the silicone is introduced to a moist or wet environment, Whisper does!
BC Satin/Matte Finish
The BC Satin/Matte Finish Add-on can only be added to all colors.
Images of Prizefighter in Rosy. The sleeve on the left has our Satin/Matte Finish. The sleeve on the right is our Standard No Finish.
Add-Ons
Shorten Sleeve Option
Shortening the exterior of a sleeve is an option for most sleeves. Sleeves that cannot be shortened will be labeled in the item description. In order for the sleeve to function properly, there must be a minimum of 1″ of solid silicone at the tip of the sleeve. For example, if the sleeve is 8″ long and the interior is 5.5″, the shortest the sleeve can be made is 6.5″
Adjusting Shore Rating (Firmness of Silicone)
The Shore Rating Adjustment can alter the firmness of the silicone from what we normally offer. Our single density sleeves generally come in our BC Medium silicone and our dual density sleeves come with our BC Soft silicone in the head of the sleeve and our BC Medium silicone in the shaft of the sleeve. Since everybody is different some may find that they prefer a softer sleeve or a firmer sleeve. If you need help deciding just reach out to our customer service, we are here to help.
Dual Density
This add-on makes the sleeve in two densities, the tip will be made in our BC Soft silicone to mimic the softness of actual penis glans while the shaft will be firmer, made out of our BC Medium silicone.
The Single Color option will result in the sleeve being one solid color. You also have the option of making the sleeve two colors. For flesh tones the tip will be pinkish and the shaft will be the chosen color (Pale, Rosy, Tan or Dark as seen in the image below). For all other colors, please select the shaft color and message us with the desired tip color.
Ordering a Dual Density Sleeve: Dual density sleeves require a longer solid tip than a regular sleeve. Whereas a regular sleeve requires 1″ of solid tip in the sleeve, a dual density sleeve requires 1.5″ of solid tip in the sleeve.
Dual Density color scheme is not available with TDTZ.
Triple Zone
This add-on makes the sleeve in three zones with two densities, the tip and the inside of the shaft will be made in our BC Soft silicone to mimic the softness of actual penis glans while the exterior shaft will be in our “BC Firm silicone.
Triple Zone sleeves cannot be shortened.
The Single Color option will result in the sleeve being one solid color. You also have the option of making the sleeve two colors. For flesh tones the tip and inner shaft will be pinkish and the shaft will be the chosen color (Pale, Rosy, Tan or Dark as seen in the images). For all other colors, please select the shaft color and message us with the desired tip color.
Triple Density Triple Zone
The (TDTZ) Triple Density Triple Zone, Soft Exterior add-on is to further customize certain single density sleeves. Single density sleeves are made in our BC Medium silicone. This add-on is made of 3 different zones and silicone firmness ratings.
- The inner chamber where the penis will reside is made of our BC Medium silicone.
- The second inner zone is made in our BC Extra-Firm silicone and extends up and stops just shy where the head of the sleeve begins.
- These 2 zones are then cast into and encased in our proprietary BC Skin-Soft silicone.
TDTZ sleeves cannot be made with Dual Density color scheme.
TDTZ sleeves cannot be shortened.
If the sleeve you want in TDTZ is not in the drop down list, TDTZ is NOT an option.
Why buy a TDTZ?
The advantage of a TDTZ over a dual density or single density sleeve is that the exterior of the shaft and head are very soft.
The BC Extra-Firm inner core (located in the area between the tip of your penis and the tip of the sleeve) provides extra rigidity which is perfect for longer extensions.
The inner shaft surrounding you penis is made of our BC Medium silicone that is encased on the outside of the sleeve with our BC Skin-Soft silicone.
Since the area of the shaft where your penis will go is very elastic the sizing works a bit different.
You can follow the normal sizing chart found above but if you are 1.8″ – 2″ you do not need to step up to a 1.25″ diameter interior. You can stay with the 1.125″ diameter interior.
If you are blessed with a long penis that almost reaches the head of a larger sleeve then you will not benefit from a TDTZ sleeve. You will want to consider a sleeve with a shore adjustment to BC Soft or BC Extra-Soft, since your penis will be acting as the firm interior of a TDTZ.
If you are looking for a longer sleeve experience and your penis is shy of the head of the sleeve, then the TDTZ add-on is worth consideration. (TDTZ) Triple Density Triple Zone Add-on, Soft Exterior
