Hi There!
You must be 18 years of age or older to view this site.
Are you over 18?
Sorry
You selected that you were under the age of 18.
If this is incorrect, Remove the "Age" cookie or wait 3 Days to regain access.
$160.00
The 7" x 2.1" Blissfull Creations Support Sleeve 3.0 is our latest version, Patent Pending. This sleeve measures 7" from tip to bottom and 2.1" in diameter at its widest point. The 7"x 2.1" BCSS can not accommodate penises over 1.85" in diameter. All Sleeves come with the Satin/Matte Finish.
Exterior of the sleeve must be a minimum of 1.5" longer than the interior.
The V3 Support Sleeves are a combination of our Support Sleeves and our TDTZ Sleeves. We have taken the best parts of each sleeve design and combined them into a support sleeve that has 30%-40% more support than a standard sleeve the same size while adding a new level of comfort.
You provide us with your penis size and the model of the support sleeve that interests you and we will custom design the the interior of the sleeve to best fit your needs. The sleeve can be made to 6.5" in length as well.
The Blissfull Creations Support Sleeve 3.0 (BCSS) can help people with Erectile Dysfunction or people who go flaccid during penetrative sex. They can also be customized to help any number of issues that do not allow a penis to obtain an erection.
The Blissfull Creations Support Sleeve is not a cure for Erectile Dysfunction nor is it a treatment. The sleeve will help provide support and structure so it can be worn with an erection or without an erection. The intended purpose of the sleeve is to help the wearer continue to engage in penetrative sex with their partner regardless of their ability to obtain or maintain an erection.
If you are seeking a support sleeve for phalloplasty please answer the bottom 4 questions or feel free to reach out to us via the contact form at the top of the page. Sizing runs a bit different.
The outer skin of the V3 Support Sleeve is made with out "skin soft" silicone. The interior of the sleeve is made with our new "Support Silicone". The support silicone is different than firm silicone. Where firm silicone may give a bit more support, firm silicone is not very elastic and does not conform to the shape of a penis very well, resulting in an uncomfortable fit. Support silicone overcomes the discomfort while adding just the right amount of support for penetrative sex, with or without and erection.
These new support sleeves are able to be rolled up and back down the penis, whether it is flaccid or erect.
Blissfull Creations specializes in custom made realistic and fantasy penis sleeves/extensions for men and your toys. You can add inches to your length and girth depending on which sleeve you choose. We custom make eachBlissful Creation ensuring its fit is perfect and as comfortable as possible. Nonetheless, we do not sit on generic stock, because all of our Blissfull Creations are custom made on demand.
Above all, your safety is our priority. Therefore, all Blissfull Creations penis sleeves and accessoriesare third party tested and certified as skin safe. We only use the highest quality platinum set, medical grade silicone, which is all manufactured in the United States. To ensure you are getting the highest quality silicone we can offer, we have a proprietary blend silicone and do not cut or thin any products.
In addition, one of the best things about our sleeves it that they stay put. You don't have to mess around with an uncomfortable nut strap or harness, because our sleeves do not slide off during use and are therefore extremely comfortable.
Information on Support Sleeves and instructions on how to measure.
Altering the exterior length of this sleeve is not an option.*
Questions? How to order.
International Shipping Update 12/7/2022***
At this time (December 2022) the only valid international options are UPS Worldwide Expedited and UPS Worldwide Saver. Occasional glitches with the website may offer other invalid options, do not use these. We are not yet offering DHL, but may in the future. UPS has the best track record for delivery among three services we've tried. If there is an issue with shipping, you should contact the carrier before you contact us, as once it's with the carrier, there's very little we can do. We do not make any money off of shipping. If you have taxes or duties due for international orders, we cannot do anything to prevent your need to pay them.
Select the Sleeve Internal Diameter and Penis Circumference below to receive an estimated Total Circumference and Total Diameter while in use.
Estimated Total Circumference: ...
Estimated Total Diameter: ...
**These Estimates are offered as a general guide, but are not an exact guarantee.
You will need to measure your penis in an erect state (length only). All sleeves stretch and come with 1" diameter opening. Choose the size interior that is the closest match. When measuring, make sure you add a 1/4", if you have pubic fat. When determining the width of the interior or inside of the sleeve, we recommend keeping the following in mind. If your toy or penis is between 1.25" and 1.5" in diameter go with the 1" width. If your toy or penis is over 1.5" in width you might want to step up to the 1.125" diameter for a more comfortable fit. This sleeve allows for a 1.25" diameter core as well. I only recommend this for men approaching or passing a 2" diameter penis. Do not order it too wide or it will slip around.
Quick side by side reference of all sleeve specifications we offer:
The Barney: 8” x 1.8” (girth of 5.6”)
Mr. Slim: 10” x 1.9” (girth of 5.96”)
Tickle Me Pickle: 7.75" x 2” (girth of 6.25”)
The English Gentleman: 7.5" x 1 ⅝” (girth of 5.1”)
The Pool Boy: 8" x 1.9” (girth of 5.9")
The Quarterback: 7.75" x 1.95” (girth of 6.125")
The Mailman: 8" x 2.125” (girth of 6.67”)
The Artist: 9.5" x 2” (girth of 6.5”)
The Mammoth: 10" x 2.25” (girth of 7”)
The Hog: 8" x 2.46” (girth of 7.72")
The Vlad: 11" x 2.25” (girth of 7")
The Dragonslayer: 9.25" x 2.54” (girth of 8”)
The Woodsman: 8" x 1.9” (girth of 5.96”)
The Woodland Elf: 9.5" x 2.25” (girth of 7.065")
The Woodland Wizard: 10.5" x 2.5” (girth of 7.85")
The Woodland God: 8" x 3” (girth of 9.42")
The ICON 12" x 3.5" (girth of 11")
The Guru 9" x 2.35" (7.38" girth)
The Bodybuilder 8" x 1.25" - 3.25" diameter (max 8.75" girth @ knots)
The Chuck 7.5" x 1.75" in diameter (5.5" in girth)
The Ninja 7" x 1.75" in diameter (5.5" girth)
The Timmy 7" x 1.75" in diameter (5.5" girth)
